314
TRACK LIGHTING Raceway
COOPER LIGHTING
HALO
®
L611, L612, L613,
Surface Mounted track (includes dead end,
mounting hardware and raceway cover).
Outlet box cover, live end connector or joiner
connectors must be ordered separately.
• L611–4’ Track.
Actual length 44 1/8” (1121mm).
Finish: White (P), Black (MB)
• L612–8’ Track.
Actual length 92 1/8” (2340mm).
Finish: White (P), Black (MB)
• L613–12’ Track.
Actual length 140 1/8” (3559mm).
Finish: White (P), Black (MB)
RACEWAY TRAC
Raceway Trac Puts Electrical Power
Where It’s Needed
Halo Raceway Trac provides electrical
flexibility at a fraction of the cost of
conventional wiring on long linear runs.
This economical single-circuit raceway
track is the most versatile track system
on the market.
Integral Raceway
Top portion of track is designed as a
raceway. Will carry up to 6 #12 AWG
conductors. Can be used to feed additional
sections of track from the original feed
point, minimizing installation time and cost.
Raceway covers are included.
Size
Raceway Trac is 1 3/8” (35mm) wide and
1 5/16” (33mm) high.
Connectors
Connectors simply push into the ends of the
Trac, eliminating splicing. L’s, T’s and X’s
allow track to be assembled in any pattern.
Grounding
To ensure safe operation the entire track
system is fully polarized and grounded.
Grounding is accomplished automatically
by a separate solid copper ground
conductor in the track. The ground
conductor maintains continuity to the
building’s grounding system through the
ground contact fingers in each of the
connectors.
Finishes
Power-Trac Raceway Trac is available in
white or matte black to provide design
flexibility.
Specifications
The structural channel is extruded
aluminum with .070” nominal wall
thickness. Conductors are solid copper
buss bars encased in rigid extruded PVC
insulators. Connectors and end caps are
molded of polycarbonate. Electrical capacity
is 20 AMPS. Halo Raceway Trac is UL listed,
CSA certified.
Polarity
A visual polarity line on Power-Trac units
indicates proper electrical installation.
Simply line-up polarity on Power-Trac and
lampholder adapter.
The two integrated raceway channels in the top of this
Trac allow additional circuits to be fed from a single feed
point. This feature makes the product well-suited for
commercial, museum and gallery use or anywhere a high
degree of circuit control is needed with a minimum of
outlet box locations. Each of the two raceway channels
will carry 3 #12 AWG wires. Grounding is continuous
through the insulated solid copper ground buss so
additional grounded wires are unnecessary. Raceway
covers are included with all Raceway Trac.
Circuit 1
Feed Point A
1 2 3 Feeds
Feed Point B Feed Point C
Circuit 2 Circuit 3
WIRING DETAILS
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals