Cooper Lighting SA6001-SA6002 User Manual download pdf

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible

contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please

contact your nearest representative.

ARM INSTALLATION

Bishop Arm (SA6001-SA6002, SA6050-SA6051, SA6101-SA6102

& SA6150-SA6151)

See Figure 1.

1. Secure arm mount flush with wall using 3/8” hardware supplied

by others.

2. Remove wireway cover screws and wireway cover.

3. Mount arm to arm mount positioning service leads in wireway.

Insert and tighten four screws to 80 in/lbs.

4. Pull fixture leads through arm.

5. Align locating pin and socket when raising fixture to arm.

See Figure 2.

6. Insert and tighten 4 fixture screws with Teflon washers, provided

in polybag, to 80 in/lbs.

7. Connect fixture leads to service leads in wireway.

8. Resecure wireway cover with wireway cover screws tightened to

50 in/lbs.

Traditional Arm (SA6003-SA6004, SA6052-SA6053, SA6103-

SA6104 & SA6152-SA6153)

See Figure 3.

1. Secure arm mount flush with wall using 3/8” hardware supplied

by others.

2. Remove wireway cover screw and wireway cover.

3. Mount arm to arm mount positioning service leads in wireway.

Insert and tighten set screw to 80 in/lbs.

4. Pull fixture leads through arm.

5. Align locating pin and socket when raising fixture to arm.

See Figure 2.

6. Insert and tighten 4 fixture screws with Teflon washers, provided

in polybag, to 80 in/lbs.

7. Connect fixture leads to service leads in wireway.

8. Resecure wireway cover with wireway cover screw tightened to

50 in/lbs.

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-658 ADW051684

Epic/Wall Mounted

Fixtures

Sheet 1 of 4

10/18/05 IMI-658

INSTALLATION INSTRUCTIONS

IMPORTANT: Read carefully before installing fixture. Retain for future reference.

General: Upon receipt of fixture thoroughly inspect for any

freight damage, which should be brought to the attention of

the delivery carrier. Compare the catalog description listed

on the packing slip with the fixture label on the housing to

assure you have received the correct merchandise.

Safety: This fixture must be wired in accordance with

the national electrical code and applicable local codes

and ordinance. Proper grounding is required to insure

personal safety. Carefully observe grounding procedure

under installation section. All work should be done by a

qualified electrician.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing

or servicing.

Fixture Screws (4)

Fig. 1

Bishop Arm

Teflon Washer (4)

(4) 3/8-16 x 1-1/4

Button Head Cap

Screws

Backplate Med

Bishop Wall

Wireway Cover

(4) 3/8" Lag Bolts

(supplied by others)

Wireway Cover

Srews (2)

Aligning Pin

Aligning Socket

Fig. 2a

Modern Top

1 2 3 4

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for me

Page 2

Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-658 ADW051684Epic/Wall MountedFixturesSheet 2 of 410/18/05 IM

Page 3

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for me

Page 4

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for me

Comments to this Manuals

No comments

Cooper Lighting SA6001-SA6002 User Manual

Browse online or download User Manual for Unknown Cooper Lighting SA6001-SA6002. Cooper Lighting SA6001-SA6002 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Cooper Lighting SA6001-SA6002