Cooper Lighting SURE-LITES PHL Series User Manual download pdf

INSTALLATION

Step 1. Separate the two EXIT panels by sliding the panel facing the installer to

the left, and the rear panel to the right (see illustration 1).

Step 2. Remove unneeded directional chevrons from the sign (see illustration 2).

Step 3. Secure the remaining chevrons by bending the outer tabs at the point of

the chevron on the back of the EXIT panel. Do not bend the two inside

chevrons (see illustration 3 and 4).

Top Mount or End Mount

Step 1. Reassemble the two panels by performing the reverse of Installation

Step 1 (see illustration 5).

Step 2. Align the four holes on the U-channel insert to the matching holes on the

sign, in the desired mounting location. Attach the aluminum U-channel to

the sign using the four screws provided (see illustration 6).

Step 3. Apply the silver screw hole covering strips to the unused holes

(see illustration 7).

Step 4. Affix the external aluminum mounting bracket to the wall or ceiling, using

suitable mounting means. If attaching the mounting bracket to a drop

ceiling, use the drop ceiling reinforcement plate and screws provided.

Step 5. Slide the U-channel into the mounting bracket (see illustration 8).

Step 6. Snap the plastic endcaps into both sides of the mounting bracket/

U-channel assembly to complete the installation.

SURE-LITES

Installation Instructions for the PHL Series Photoluminescent EXIT

Photoluminescent EXIT sign, requiring only 5 foot-candles of external fluorescent illumination to charge.

Operating temperatures from 10-40°C (50 – 104°F), Indoor Use Only.

IMPORTANT SAFEGUARDS

WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS

BE OBSERVED INCLUDING THE FOLLOWING:

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS

2. Do not use this equipment for other than the intended use.

3. Installation is to be performed only by qualified personnel.

4. Install in accordance with National Electric Code and local regulatory agency requirements.

5. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.

6. SAVE THESE INSTRUCTIONS.

Customer First Center 1121 HIGHWAY 74 SOUTH PEACHTREE CITY, GA 30269 3/07 11554915

INCLUDED HARDWARE:

A. U-channel

B. Mounting Bracket

C. End Caps

D. Drop Ceiling Reinforcement Plate

E. Hardware Package

Illustration 1 Illustration 2 Illustration 3 & 4

TOP VIEW

1 2

SURE-LITES 1

Summary of Contents

Page 1 - SURE-LITES

INSTALLATIONStep 1. Separate the two EXIT panels by sliding the panel facing the installer tothe left, and the rear panel to the right (see illustrati

Page 2

SURE-LITESCustomer First Center 1121 HIGHWAY 74 SOUTH PEACHTREE CITY, GA 30269 3/07 11554915Surface MountStep 1. Using a drill, self drilling screws

Comments to this Manuals

No comments

Cooper Lighting SURE-LITES PHL Series User Manual

Browse online or download User Manual for Wall & ceiling mounts accessories Cooper Lighting SURE-LITES PHL Series. Cooper Lighting SURE-LITES PHL Series User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Wall & ceiling mounts accessories Cooper Lighting SURE-LITES PHL Series