Cooper Lighting Portfolio MD6xT4 User Manual

Browse online or download User Manual for Floodlights Cooper Lighting Portfolio MD6xT4. Cooper Lighting Portfolio MD6xT4 User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
704530 Rev. A - 1 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269
Portfolio
®
Installation Instructions for MD6xT6, MD6xT4, MD6CPxT6 and MD6CPxT4
Commercial Recessed Housings
CAUTION: To avoid possible electrical shock, be sure that power supply is turned off before installing or servicing this
fixture.
CAUTION: Metal halide lamps have arc tubes that operate at extremely high temperatures and may shatter unexpectedly
as a result of misapplication, system failure or internal factors. This violent failure could cause extremely hot glass
and lamp parts to discharge into the surrounding environment, creating a risk of personal injury, fire or property
damage. Therefore, it is incumbent on the user to use common sense and good judgment in anticipation of these
potential violent failures. Never use or operate this fixture without safety glass or lens properly installed and secured in
place.
Reduction of Risk
The potential of violent failure can be significantly reduced by relamping at or before the rated end of life. In applications
where the lamps burn continuously, the lamps should be turned off for a period of 15 minutes at least once per week
which will cause lamps nearing their end of life to fail passively upon relighting. Careful adherence to the above
precautions may not eliminate all possible risks associated with the use of Metal Halide lamps, but it will reduce the
likelihood of personal injury or property damage.
Rough-In Mounting
This fixture should be supported by main runners or
other structure that is capable of supporting fixture
weight of 17lbs.
The junction box will accept both ½ and ¾” trade size
metal conduit.
Review fixture labeling to make sure it is rated for the
voltage installation being used.
The housing is designed for installation where it will
not come in contact with insulation. Thermal insulation
must be kept a minimum of three inches (3”) away
from the housing sides, top and junction box.
This housing/trim is designed to be used with T6/T4.5
Ceramic Metal Halide lamps for the specified wattages
only. These lamps can cause serious skin burn and
eye inflammation from shortwave ultraviolet radiation if the envelope of the lamp is broken or punctured.
Risk Of Fire
Supply conductors (power
wires) connecting the fixture
must be rated minimum
90°C. If uncertain, consult an
electrician.
Risk Of Electrical Shock
Disconnect power at fuse or
circuit breaker before
installing or servicing.
Risk Of Fire.
Do not install insulation
within 3 inches (76 mm) of
any part of the fixture or in a
way that may entrap heat.
Page view 0
1 2 3 4 5 6 ... 10 11

Summary of Contents

Page 1 - Portfolio

704530 Rev. A - 1 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® Installation Instructions for

Page 2

704530 Rev. A - 10 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® 6. For Housings with Universa

Page 3

704530 Rev. A - 11 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® 8. For Housings with Universa

Page 4

704530 Rev. A - 2 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® Step 1. Install fixture into

Page 5

704530 Rev. A - 3 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® Distribution Selection & T

Page 6

704530 Rev. A - 4 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® Lamping Information • The el

Page 7

704530 Rev. A - 5 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® To re-lamp from below the ceil

Page 8

704530 Rev. A - 6 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® Ballast Replacement • The ba

Page 9

704530 Rev. A - 7 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® Step 3. Remove the socket fro

Page 10

704530 Rev. A - 8 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® 2. For Housings with Ballasts

Page 11

704530 Rev. A - 9 - Customer First Center · 1121 Highway 74 South · Peachtree City, GA 30269 Portfolio® 4. For Housings with Universal

Comments to this Manuals

No comments